For anyone tired of manually covering their swimming pool, pool covers are an ideal alternative. With the actuation of a switch, vinyl takes place by itself, so that the water is protected against weather, leaves and other debris.
But these accessories can be quite expensive, so when you buy automatic pool covers, you want to make sure it lasts.
Image Source: Google
It is inevitable that the leaves, debris, snow and ice accumulates on the vinyl when it is stretched over the water. It is important to clean them away as soon as possible.
The extra weight can strain the vinyl and the coil elements that help unwind automatic pool covers. Use a telescopic brush to wipe the leaves gently, snow and other debris. If water has accumulated on the surface, use a small pump to remove.
The water level in the pool is essential to maintain your coverage. The water should reach about halfway skimmer. If it exceeds that time, the components of the coil and the system may be flooded. If it falls below the mid-skimmer, vinyl may begin to sag, causing the strain again to accumulate debris.
At least two to three times per year, automatic covers must be cleaned to remove chemical residues that can make them more quickly degrade. Drop vinyl and work in small sections, using a mild dish detergent and a soft brush to scrub clean. Rinse with your garden hose. If water accumulates on the surface once you're done, you can use a pump to remove.